Education Library · Financing Tools · Article 7

Short answer: An SBA 504 loan finances a building, land or long-life equipment by splitting the cost three ways: a bank loan for about 50% in first position, a Certified Development Company (CDC) loan for up to 40% in second position, and an owner down payment that is usually 10%. The CDC piece carries a long fixed rate. The trade-off is that 504 money only goes to fixed assets, so it won’t cover working capital, inventory or most trucks.

A vehicle graphics shop owner with nine full-time people told us he already owned the land and planned to build using the 504 program, timed so the new shop would be done when his lease ran out. His words: “Starting the business was easy. Getting a different building, that’s a whole different situation.” For a lot of trades owners, the shop, the yard or a big piece of equipment is the largest purchase they will make, and 504 is the SBA program built for it.

How the three-part structure works

A bank (the third-party lender) makes a conventional loan for at least 50% of the project and takes the first lien. A CDC, a nonprofit certified by the SBA to run the program in your area, lends up to 40% and takes the second lien. That CDC loan is funded by an SBA-guaranteed bond called a debenture. The owner puts in the rest. On a $1,500,000 shop for a plumbing company that has operated more than two years:

  • Bank loan, first lien: $750,000 (50%)
  • CDC/SBA loan, second lien: $600,000 (40%)
  • Owner down payment: $150,000 (10%)

The owner contribution goes to 15% if the business has operated two years or less, or if the building is a limited or single-purpose property (hard to reuse, like a car wash). If both apply, it goes to 20%. On the same project, that is $225,000 or $300,000.

The SBA caps the CDC portion at $5,000,000 per borrower, or $5,500,000 per project for small manufacturers and certain energy projects. The bank loan sits on top, so total projects can run well past those numbers. The business must also be small by SBA standards. One alternative test is tangible net worth of $20 million or less and average after-tax net income of $6.5 million or less over two years, which most trades companies are nowhere near.

What 504 can and can’t pay for

Eligible uses include buying land or an existing building, building new, renovating, and machinery or equipment with a useful life of at least 10 years. Appraisals, environmental reports, architect and engineering fees, title costs and a construction contingency of up to 10% can usually be included.

It can’t be used for working capital, inventory, or a building bought to rent out as an investment. That rules out what many owners want to bundle with a move: payroll during the transition, materials, a new van or a cash cushion. Service trucks usually fail the 10-year useful life test, so fleet purchases belong under equipment financing. Some heavy equipment qualifies, but useful life is judged item by item, so ask the CDC about a specific machine.

Owner-occupancy rules for buildings

For an existing building, the business must occupy at least 51% of the rentable space and can lease out up to 49%. For new construction, it must occupy at least 60% right away, can permanently lease up to 20%, and needs a plan to grow into the rest (some within three years and all of it within ten). On a 10,000 square foot existing building, your company uses at least 5,100 square feet. Leasing the remainder to another contractor is allowed. Buying mainly to collect rent is not.

Job creation and public policy goals

504 is an economic development program, so each project has to meet a job goal or another program goal. For loans approved on or after October 1, 2025, the standard is one job created or retained for every $95,000 of debenture, or $150,000 for small manufacturers and energy projects. The $600,000 CDC piece above works out to roughly six jobs. A project can instead qualify under community development or public policy goals, such as rural development, business district revitalization, expanding businesses owned by veterans, women or minorities, or cutting energy use by at least 10%. The CDC documents this, but ask early how your project will qualify.

Terms, rate and fees

The CDC loan comes in 10, 20 and 25-year terms. Real estate usually uses 20 or 25 years and equipment-only projects usually use 10. The CDC rate is fixed for the full term, tied to the 10-year Treasury plus a set increment, and locked when the debenture is sold. The bank portion is a separate loan on the bank’s terms. It may be variable, reprice after a few years or carry a balloon, so read that note as carefully as the SBA piece.

The SBA says fees on the CDC portion run about 3% of the debenture and can be financed into the loan, around $18,000 on a $600,000 debenture. The bank has its own fees, and you pay for appraisal, environmental and legal work. Ask both lenders for a written fee list.

The CDC portion of a 20 or 25-year 504 also carries a prepayment penalty that starts near the debenture rate in year one and declines to zero after year 10. A 10-year 504 has a declining penalty for five years. On one of our calls, Paul Childers told an owner, “If you’re going to pay it off early and not do the full term on the 504, I would go with 7A because the payoff penalties are significantly lower.”

Refinancing existing debt

When you are expanding, qualifying existing debt on fixed assets can be refinanced into the project. Without an expansion, a business that has operated at least two full years can refinance commercial debt that is at least six months old, was used at least 75% for eligible fixed assets, and is secured by those assets, as long as the combined loans stay at or below 90% of the property’s value. For an owner who bought a shop on a five-year balloon note, this can turn it into long-term fixed-rate debt.

Personal guarantee and underwriting

Like other SBA loans, a 504 generally requires personal guarantees from owners of 20% or more, and both lenders take liens on the property (see SBA loans and personal guarantees).

Underwriting pulls several years of returns, interim financials, a debt schedule and business credit files, and small problems slow things down. When the graphics shop owner’s business credit files were pulled, a partner who left years earlier still showed as a key person, and old UCC filings had never been terminated. Those mismatches are worth fixing before an underwriter asks. Our articles on tax returns and business loans and UCC liens and credit report errors cover what to check.

How long it takes

A straight purchase of an existing building often funds in about two months once the application is complete. Construction takes longer. During the build, the bank usually provides interim financing for both pieces, and after completion the debenture is sold and pays off the CDC share. Work backward from your lease end date, the way that graphics shop owner did with a contractor lined up to start in April, and leave room for appraisal and environmental delays.

504 or 7(a) for a shop or heavy equipment

  • 504 usually means a lower down payment on a large property and a long fixed rate on the CDC portion, with no working capital, two lenders, two sets of documents and a prepayment penalty that can last 10 years.
  • 7(a) is one loan from one lender, up to 25 years on real estate and usually up to 10 on equipment, often at a variable rate. It can combine the building with working capital, moving costs, trucks and equipment. Its prepayment fee applies only on loans of 15 years or longer, only when you prepay more than 25% in a year, and only in the first three years (5%, 3%, then 1%).

An HVAC owner buying a $2 million building to hold for twenty years, with strong cash flow, is the typical 504 case. A roofing owner who wants a smaller yard plus $300,000 of working capital and a few trucks may find a 7(a) or a conventional bank loan simpler. An excavation owner buying long-life equipment can compare a 10-year 504, a 7(a) and straight equipment financing on total cost. A local bank that knows your business may beat all of them with a conventional loan. Have your CPA compare payment, cash at closing and prepayment terms side by side.

This article is educational and isn’t legal, tax, accounting or lending advice. Program rules, lender terms and credit bureau practices change, so verify current terms before acting.

Command your own path.